Zorg ervoor dat de mute-schakelaar in de spreekpositie staat. Controleer de positie van de microfoonarm van uw headset en zorg ervoor dat die zich ongeveer 2 cm van uw onderlip bevindt. Het volume van de microfoon is mogelijk te laag. Til het bovendeksel van de versterker op en regel

How to program the button setting/changing a Flexible Button’s Function
1. Press #9876 to enter User Programming Mode.
2. Press Hold.
3. Press the Flexible Button to set or change.
4. Enter the Flexible Button Code 280 (Release/Answer)
5. Press the same Flexible Button (flashing) to save the setting. “DATA PROGRAMMED” appears on your LCD.
The installing dealer can also use Network eManager to program the button. They would connect to the CIX and do the following:
1. Select Station and then Station Assignments
2. Select the DN they want to change from the list on the left
3. Select the Key tab
4. Select an empty button
5. Select Call control from the right window
6. Click on Release/Answer
7. Click submit

{gnresource:HSS_8050-04_klein}

Connection:

Take the RJ10 cable connection with RJ10 and plug one end of the cable into the jack marked "telephone icon" of the repeater.

Disconnect the handset cable from the telephone and connect one end into the jack
marked "handset device" jack of the repeater.

Now plug the other end of the RJ10 cable into the handset jack of the telephone.

{gnresource:HSS_GN2100-an-GN8000-Anschlussbild-448x256(1)}

Now open the cover of the repeater. On the right side is the Battery compartment into which you must insert the provided batteries.

The battery storage switch (A B C) can help in extending the life of the battery.

{gnresource:HSS_GN8210_schalter_ABC_klein}  

A: Battery charger is enabled / charging through incoming signal
B: Battery charge is enabled / charging through incoming signal
B: Battery charging switch is SWITCHED OFF

You can also operate the GN 8050 with a power supply instead of the batteries.
The article number for this is 26-0098

If, subsequently, you hear a threefold audio signal in the Headset, this will be an indication of low battery power.

Headset:

Now connect the quick-disconnector of the headset to the quick-disconnector the connector cable.

{gnresource:HSS_GN2100_anschlussQD}
Setting the telephone:

To test the function, put the headset on and take the receiver of the telephone. Now set the switch Telephone/Computer to " Telephone "

If no distinct dial tone is heard in the headset, operate the compatibility switch (which is under the battery compartment) from A- I
till you receive a clear dial tone in the headset.

{gnresource:HSS_SchalterGN8000(A-I)

Setting the microphone volume:

To set the microphone/ transmission volume set the mute button to "speak" and make a call to someone, if the person you call does not hear you very clearly, then operate the volume control from 1-8 till they can hear you clearly.

{gnresource:HSS_GN8000_Regler_Sendelautst?rke_klein(1)}

Setting the volume:

You can set your desired volume with the reception volume control.

{gnresource:HSS_GN8000_Empfangslautst?rke_klein}

Setting PC:

Take the PC connection cable (3,5 mm jack with 2x3,5 mm jack) and plug the individual end of the Y-cable into the jack marked "computer" on the rearside of the repeater.

Then plug the green jack connector into the jack marked "microphone icon" and the black jack connector Plug into the jack marked " speaker or headset icon of your computer.


Function:

Telephone icon: Headset operation:
Telephone icon: simultaneously with the Headset telephone &Audio applications
Computer icon: Speech/audio application

{gnresource:HSS_GN8050_Schalter_Tel_PC_orginal}

You can set the volume of the computer signal with the reception volume control.

{gnresource:HSS_GN8050_PC_lautstärkenregler_klein}

For the Receiver operation the Telephone/computer switch must be set to
" Computer" .

As the Temporis has both an RJ9port and RJ45 data port, the cord 8800-00-25 and the GN 1200 can be used.

Afhankelijk van de geselecteerde geluidsmodus kan het inkomende volume laag lijken vergeleken met wat u gewend bent. Als u de TT-4 Beschermingsmodus (instelling C) heeft gekozen, mag u niet vergeten dat dit een zeer strenge beschermingsnorm is die is ontwikkeld om uw

Het volume van de microfoon is mogelijk te hoog. Til het deksel bovenaan de versterker op en zet het microfoonvolume lager.

Zorg ervoor dat het headset stand/online waarschuwingslampje goed is aangesloten op de poort aan de achterkant van de versterker. Zorg ervoor dat de batterijen juist geïnstalleerd zijn. Vervang de batterijen door nieuwe.

Zet de headset aan. Neem de handset op en luister of u in de headset een kiestoon hoort. Als u geen of een onzuivere kiestoon hoort, moet het apparaat verder worden afgesteld. Verwijder het deksel van het basisstation en zoek de schakelaar voor de kiestoon. Verschuif de schakelaar (door de instellingen A-G) tot de kiestoon zuiver is. Is de kiestoon

{gnresource:HSS_GN8000_foto_klein}


Connection:

Take the RJ10 cable connection with RJ10 and plug one end of the cable
into the jack "marked telephone icon" of the repeater.

Disconnect the handset cable from the telephone and plug this into the jack
"marked handset" of the repeater.

Now plug the other end of the RJ10 cable into the handset jack of the telephone.

{gnresource:HSS_GN2100-an-GN8000-Anschlussbild-448x256(1)}

Now open the cover of the repeater. On the right side is the Battery compartment into which you must insert the batteries provided.

The battery storage switch (A B C) can help in extending the life of the battery.

{gnresource:HSS_GN8210_schalter_ABC_klein}  

A: Battery charger is enabled / charging through incoming signal
B: Battery charge is enabled / charging through incoming signal
B: Battery charging switch is SWITCHED OFF

You can also operate the GN 8000 with a power supply instead of the batteries.
The article number for this is 26-0098

If, subsequently, you hear a threefold audio signal in the Headset, this will be an indication of low battery power.

Headset:

Now connect the quick-disconnector of the headset to the quick-disconnector of the connector cable.

{gnresource:HSS_GN2100_anschlussQD}
Setting the telephone:

To test the function, put the headset on and take the receiver of the telephone. Now set the switch headset/receiver to "Headset."

If no clear dial tone is heard in the headset, operate the compatibility switch (which is under the battery compartment) from A-I
till a clear dial tone is received in the headset.

{gnresource:HSS_SchalterGN8000(A-I)}

Setting the microphone volume:

To set the microphone/transmission volume, set the mute button to "speak"and make a call to someone. If the person you call does not hear you very clearly, then operate the volume control from 1-8 till they can hear you clearly.

{gnresource:HSS_GN8000_Regler_Sendelautstärke_klein(1)}

Setting the volume:

{gnresource:HSS_GN8000_Empfangslautstärke_klein}
You can set the desired volume with volume reception control.

Een pieptoon in uw headset kan erop wijzen dat de batterijen in uw versterker bijna leeg zijn. Vervang beide batterijen door nieuwe AA Alkaline-batterijen.

Het volume van de microfoon is mogelijk te hoog ingesteld. Til het deksel bovenaan de Jabra GN8210 op en zet het microfoonvolume lager door tegen de wijzers van de klok in te draaien. Waarom gaat het online waarschuwingslampje niet branden of knipperen? Zorg ervoor dat het headset stand/online waarschuwingslampje is

Een pieptoon in uw headset kan erop wijzen dat de batterijen in uw versterker bijna leeg zijn. Vervang beide batterijen door nieuwe AA-batterijen.

Zorg ervoor dat de mute-schakelaar in de spreekpositie staat. Controleer de positie van de microfoonarm van uw headset en zorg ervoor dat die zich ongeveer 2 cm van uw mond bevindt. Het uitgaande volume is mogelijk te laag. Til het bovendeksel van de versterker op en regel het volume

{gnresource:HSS_GN8210-Bild-WG}

Connection:

Take the connection cable RJ10 with RJ10 and plug one end of the cable into the jack marked "Telephone icon" of the repeater.

Now disconnect the handset cable from the telephone and plug this into the jack marked
"handset" of the repeater.

Now Plug the other end of RJ10 cable into the handset jack of the telephone.

{gnresource:HSS_GN2100-an-GN8000-Anschlussbild-448x256(1)}

By means of the selector switch (A B C ) you can take account of the EU guideline (85 dB).

{gnresource:HSS_GN8210_schalter_ABC_klein} 

A: Increased high frequencies
B: Clear digital understanding
C: Highest hearing protection (Australian standard TT-4)

Thanks to the DSP (Digital signal processor) background noise or interference is filtered out.

Headset:

Now connect the quick-disconnector of the headset to that of the connector cable.

{gnresource:HSS_GN2100_anschlussQD}
Setting the telephone:

To test the function, put the headset on and take the receiver of the telephone. Now set the switch headset/receiver to "Headset".

If no clear dial tone is heard in the headset, operate the compatibility switch from A-I till a clear dial tone is received in the headset.

{gnresource:HSS_SchalterGN8000(A-I)}

Setting the microphone volume:

To set the microphone/ transmission volume, set the mute button to "speak" and make a call to someone. If the person you call does not hear you very clearly, then operate the volume control from 1-8 till they can hear you clearly.

{gnresource:HSS_GN8000_Regler_Sendelautstärke_klein(1)}

Setting the volume:

You can set your desired hearing volume using the reception volume control .
{gnresource:HSS_GN8000_Empfangslautstärke_klein}

Controleer of u de draden van zowel de headset als de handset op de juiste poorten hebt aangesloten. Zorg ervoor dat de headset/handset schakelaar in de headset positie staat. Zorg ervoor dat de batterijen juist geïnstalleerd zijn. Vervang de batterijen door nieuwe. Mogelijk

Controleer of u de draden van zowel de headset als de handset op de juiste poorten hebt aangesloten. Zorg ervoor dat de handset/headset schakelaar in de headset positie staat. Zorg ervoor dat de batterijen juist geïnstalleerd zijn. Vervang de batterijen door nieuwe. U

Het Uitgaande Volume is mogelijk te hoog. Til het deksel bovenaan de versterker op en zet het uitgaande volume lager.

Zorg ervoor dat de mute-schakelaar in de spreekpositie staat. Controleer de positie van de microfoonarm van uw headset en zorg ervoor dat die zich op ongeveer één vingerbreedte van uw onderlip bevindt. Het Uitgaande Volume is mogelijk te laag. Til het bovendeksel van de versterker op

Ja, de Jabra GN8210 werkt zowel met analoge als met digitale telefoonsystemen

Spraakherkenningsoftware heeft nog wat beperkingen wat betreft het begrijpen van gesproken taal. Voor betere prestaties plaatst u de microfoon voor uw mond, 1 vingerbreedte verwijderd van uw lippen. Stel de instellingen voor de microfoongevoeligheid in op de computer. Raadpleeg uw softwa